Best Stainless Steel Tile Trim Manufacturer And Wholesale Supplier

How To Fix The Ceiling When The Stainless Steel Line Is Installed?

1605515383-微信图片_20181009151712

Specific operation method:

  1. First fix the wooden slats on the wall with nails;
  2. Use glue or glass glue to fix the stainless steel (U-shaped) to the wood strip.

This depends on whether you are an inner concave line or an outer convex line. The inner concave requires a groove under the metal strip, and the outer convex requires a wooden strip to buckle the metal strip.

Leave grooves on the wooden foundation, and glue the finished lines after they arrive.

Specific installation method one:

  1. First fix the wooden slats on the wall with nails;
  2. Use glue or glass glue to fix the stainless steel (U-shaped) to the wood strip.

Installation method two of ceiling metal line:

Generally, a groove is left on the top surface and then the metal strip is glued to it. Of course, the groove should be left just right so that there is an interaction force with the metal strip, too loose.

There is also a wooden line smaller than the metal strip on the top surface, and finally the metal strip is stuck up. Generally, the metal strips on the top surface are relatively thin and the height is not high. The recessed strips are easier to handle.

 

avatar
Kuanyu Stainless Steel Co., Ltd.
already 1 902 messages

  • jack 22:42.PM  Apr.10,2021
    Hello, dear sir/madam, welcome to our website! I’m jack,May we know which product you need?(Stainless steel U/L/T trim、Tile edge profile trim、Skirting、Non slip strips、Colored decorative pipe)?