Best Stainless Steel Tile Trim Manufacturer And Wholesale Supplier
top
Search News Category News Tags Latest News Archive Time
How to fix the brushed stainless steel line closed ceiling on the stone?
How to fix the brushed stainless steel line closed ceiling on the stone?

One: stainless steel line closed ceiling inlay method

  1. Pull out the groove of the size of the decorative strip on the surface of the stone. The depth is determined according to the needs, that is, the size of the decorative strip higher than the board surface or the inlay size, the depth of the groove is slightly deeper than the actual size
  2. Apply marble glue to the stone trough, insert the stainless steel decorative strip into the stone trough, determine the position, height and size of each place
  3. After waiting for a few minutes, if the marble glue is not completely dry, use a utility knife to scrape off the excess or overflowing glue, and wait for it to dry completely.

Two: Floating Paste Method 

  1. Apply marble glue directly to the bottom of the decorative strip, and stick it on the surface of the stone after determining the size. Generally, it is recommended to use an angle grinder to polish the sticking position to be rough.
  2. When the marble glue is not completely dry after waiting for a few minutes, use a utility knife to scrape off the excess or overflowing glue, and wait for it to dry completely.

The ceiling stainless steel line has hardness when it is sliced with new ones. You need to change the slices and cut one or two corners frequently. The old ones can still be used. Don't be afraid of waste. When cutting, you must master the running speed, and you must stay on the same mouth back and forth. Also, sticking paper tape on the reserved surface at 45° can also prevent the cut from turning black. The diamond blade cuts, the cuts are not very neat, the new slices are lightly cut, and the rose gold can cover the spots.

How to fix the stainless steel line ceiling on the railing against the wall?

Drag out the groove of the stainless steel ceiling specification on the surface of the marble. The depth 1 must be confirmed, which means that the decorative strip is higher than the gluten specification or the bezel specification. The depth of the groove 1 is slightly deeper than the actual specification. Wipe on the marble tank, insert the stainless steel decorative strip into the marble tank, confirm the aspect ratio of the part and the specifications of each part.

Stainless steel line background to choose ceramic tiles and distinguish the quality of ceramic tiles?

  1. Look at the color: tiles with the same name, model, and specification should have the same color and no color difference;
  2. Look at the shape: the front of the whole tile, whether the edge is covered with glaze, whether there are cracks, spots, or defects on the surface of the tile;

Check the flatness: Close the front of the tile to a piece of smooth glass, turn the four corners, and check whether the tile is flat. The flatter the tiles, the better the quality;

  1. Check the compactness: Take out a tile, and drop a little ink on the back to see how well the ink is absorbed by the tile. If the ink absorbs quickly, it means that its compactness is poor. According to the quality standard, the unglazed part on the back of the tile should be dense and have a water permeability of no more than 10%; 
  2. Listen to the sound: When you strike, it is a good brick that can make a crisp "Dangdang" sound.
Kuanyu Stainless Steel Co., Ltd.
already 1 902 messages

  • jack 10:12 AM, Today
    Hello, dear sir/madam, welcome to our website! I’m jack,May we know which product you need?(Stainless steel U/L/T trim、Tile edge profile trim、Skirting、Non slip strips、Colored decorative pipe)?