Best Stainless Steel Tile Trim Manufacturer And Wholesale Supplier

Explain The Installation Method Of Stainless Steel Decorative Lines In Detail!

1604905659-Stainless Steel21

Stainless steel lines are mainly used between various structures in the room, between various decorative surfaces, between various decorative materials and between materials on the same surface. Such lines are used for decoration at interfaces and seams. Using lines to decorate these parts is a key process in the connection and recovery of decoration. Stainless steel wire installers must make preparations before installing the stainless steel wire. This is a very critical and important step: first carry out a strict inspection of the stainless steel wire. There must be no scratches and bumps on the surface of the metal decorative line, and the size must be accurate.

Observe whether the base surface is firmly fixed, and whether there are unevenness at the seam, find out the cause of the uneven base surface, and reinforce and correct it in time. The 304 lines of various stainless steel pipes are installed properly; the interface should be far away from people's line of sight and placed in an inconspicuous place indoors. Especially the stainless steel lines with very obvious interfaces, it should be noted that the alignment of the lines is just right.

First use round nails to fix a wooden lining strip at the closing position. The width and thickness of the wooden lining strip are slightly smaller than the inner diameter of the stainless steel. The concave needs to be under the groove, and the lines are covered with glass glue or silica gel to be embedded in the groove, and the convex needs to be under the wooden bar to buckle the stainless steel line. Then apply epoxy resin glue on the wooden lining strip, paint epoxy resin in the stainless steel strip groove, and then clamp the line on the wooden lining strip. The installation of the stainless steel line on the top surface first depends on whether it is an inner concave line or an outer convex line. The inner concave requires a groove under the metal strip, and the outer convex requires the lower wooden bar to buckle the metal strip. All the wood foundations are grooved, and then the stainless steel lines are glued to stand on the wood foundation.

The stainless steel strip on the top is generally more than 25MM wide, because the processing factory is easy to bend into C shape, the wood union adds a circle of density board or wood board on the top gypsum board ceiling, so the width of the stainless steel edge should not be too narrow , Otherwise it will be very laborious to open the wooden strips. After ordering a circle of wood board on the ceiling, the stainless steel strip is glued with glass glue. Use textured paper to help fix 24 novels. Stainless steel lines are widely used in today's interior decoration. Although the installation seems relatively simple, if you do not grasp the details, not only the desired effect will not be achieved after the installation is completed, but it may also affect the beauty of the interior decoration.

avatar
Kuanyu Stainless Steel Co., Ltd.
already 1 902 messages

  • jack 10:12 AM, Today
    Hello, dear sir/madam, welcome to our website! I’m jack,May we know which product you need?(Stainless steel U/L/T trim、Tile edge profile trim、Skirting、Non slip strips、Colored decorative pipe)?