Best Stainless Steel Tile Trim Manufacturer And Wholesale Supplier

Embedded Stainless Steel Decorative Trim Installation

1605515264-tilr trim (4)
  1. First of all, you should prepare the stainless steel decorative trim, select thetrim, and confirm that there are no scratches and bumps on the surface and the size is correct.
  2. Check whether the base surface of the closing butt joint is firmly fixed, and whether there is unevenness in the joint and handle it properly.
  3. The counterpoint of various decorative trimshould be far away from people's line of sight, or placed in an inconspicuous place indoors. In particular, the interface is more obvious with metal decorative strip, and more attention should be paid to the arrangement of the matching positions of the decorative strip.
  4. Fix a wooden lining strip at the closing position with round nails. The width and thickness of the wooden lining strip are slightly smaller than the inner diameter of stainless steel.
  5. Apply epoxy resin (universal glue) on the wooden lining strips, and epoxy resin in the stainless steel strip grooves, and then clamp the lines on the wooden lining strips.
  6. The surface of the stainless steel trimgroove is usually covered with a protective layer of plastic tape. The plastic tape should be torn off from the stainless steel line groove after the finish construction. If there is no protective layer of plastic tape on the surface of the line groove, a layer must be attached before construction to avoid damage to the line surface during construction.
avatar
Kuanyu Stainless Steel Co., Ltd.
already 1 902 messages

  • jack 10:12 AM, Today
    Hello, dear sir/madam, welcome to our website! I’m jack,May we know which product you need?(Stainless steel U/L/T trim、Tile edge profile trim、Skirting、Non slip strips、Colored decorative pipe)?